March 27, 2019
Migration to a PlantPAx distributed control system helps city increase wastewater capacity, streamline control and training, and minimize overtime.
February 22, 2019
Sleeman Breweries needed to meet consumer demand. With an updated process automation system, Sleeman increased production capacity by 50 percent.
February 11, 2019
Based on independent cart technology, new KUKA system solves assembly buffering challenges – and features extraordinary flexibility.
January 25, 2019
Automated seating system design for Adelaide Convention Centre reduces the requirement for manual handling while also providing the capability for faster changeover times.
January 18, 2019
Upgrade to legacy drive control equipment on paper machine winder helps avoid any potential for downtime while also future proofing Visy’s Tumut plant.
January 14, 2019
Faster, easier integration is now possible in this revolutionary approach to auto body assembly based on independent cart technology.
January 1, 2019
Off-site support augments on-site maintenance team and helps optimize asset performance.
December 14, 2018
Sinhyung Engineering selected a single controls supplier to help meet the changing demands of its end users and create flexible, scalable machines.
December 11, 2018
Hirata developed a machine for the electric vehicle market that can help mass produce batteries.
November 30, 2018
Livetech implemented a secondary packaging line for Galbusera-Tre Marie, an Italian brand with a long history in bakery industry. Flexibility and delicacy were key.
November 14, 2018
Hanyang Packaging and Engineering used Rockwell Automation Integrated Architecture to increase productivity and keep up with market demand.
November 1, 2018
Next generation, fully integrated, single-platform control, alarming and reporting architecture delivers clear results for water-treatment company.
October 29, 2018
Bibit software solutions and Rockwell Automation Integrated Architecture made it possible for this well-known coffee producer to obtain important food safety certification.
October 17, 2018
Rockwell Automation creates new NSF-Certified HMI for food industry. Stands up to extreme IP69K operational and wash down practices.
October 10, 2018
AFA Systems takes full advantage of robotics in monobloc cartoning solution that runs on a single control platform.
October 1, 2018
This dairy needed to increase production capacity to meet increasing consumer demand. With PlantPAx DCS, the dairy reduced energy usage and increased production.
October 1, 2018
With a turnkey serialization solution, biopharma company is creating high-quality, life-saving medicines – and surpassing current and evolving regulatory requirements.
September 28, 2018
With integrated condition monitoring and unparalleled local support, O&G producer reduced downtime of critical assets by 20 percent.
August 28, 2018
Using advanced safety and analytics, Aagard optimizes end of line operations with integrated cartoner-case packer-palletizer system.
August 14, 2018
Jim Beam implements Model Predictive Control at Clermont, Kentucky distillery to maximize throughput while respecting equipment and process constraints.
August 6, 2018
Rockwell Automation modernises network at geothermal plant; delivering higher performance, easier diagnostics, enhanced data capture and more robust cybersecurity.
July 3, 2018
Solvent plant has realized $1 million in new monthly revenue with a modern DCS system and greater batch automation.
June 27, 2018
To increase efficiency, MCNS selected FactoryTalk VantagePoint to seamlessly integrate systems and organize, correlate and normalize disparate data.
June 8, 2018
When IT and OT meet, efficiency among processes, people and geographies increases.
June 6, 2018
Global tyre manufacturer incorporates new features in its productions systems that deliver much more flexibility in terms of tyre-size changes and product handling.
May 6, 2018
Australia's largest generator of clean renewable energy, Hydro Tasmania, develops industry leading hybrid system on Flinders Island.
April 30, 2018
Arnott’s embarked on a control and HMI system upgrade to deliver increased flexibility and agility for biscuit production.
April 20, 2018
To safeguard future production of a large-scaled gelatine manufacturing plant, an innovative risk management approach was undertaken to help identify and replace legacy equipment.
April 19, 2018
With a strong commitment to continuous improvement of current manufacturing assets, Miraka invested in a solution to optimise their milk powder process.
April 18, 2018
Using the PlantPAx DCS, ZIPPE created a high-availability and powerful batch plant within one year.
April 17, 2018
A new explosives manufacturing plant in Europe invests in the latest motor control technology from Australia.
April 16, 2018
Henshaw replaces legacy CNC system with programmable numeric control (PNC) to improve machining cell performance and flexibility.
March 19, 2018
End user achieves significant cost savings and simplified start-up.
March 1, 2018
Arkansas Steel needed to improve workforce utilization and make continuous improvements. Software from Rockwell Automation helped increase yield by at least 3 percent.
February 21, 2018
With control system upgrade, Modern Machine Tool Company achieves multifunctional performance – without full-blown CNC system.
February 8, 2018
Central States Industrial (CSI) steps up to industry and regulatory demands with robust, modular clean-in-place solution.
January 29, 2018
A new facility in the Netherlands can produce 7.5 tons of milk powder per hour.
January 9, 2018
Deyu's winding machines help customers achieve higher productivity and lower cost in battery production, and enhance the reliability and energy density.
January 7, 2018
Tomatic replaces unsupported black-box hardware & software at construction chemical company with modern, integrated, connected process control solution with Industrie 4.0 capabilities.
January 2, 2018
Connected, integrated control solution delivers greater process precision, enhanced energy management and comprehensive data-capture capabilities at Ukrainian sinter plant.
December 9, 2017
AT Equipment and Services GmbH, was tasked with the development of a precision control solution for two large permanent-magnet (PM) motors deployed in a dual-chamber shredding unit.
December 6, 2017
ECONO-PAK was approached by Lotte Wedel to develop a packaging/cartoner machine that would more easily cater for varieties in packaging formats and product counts.
November 30, 2017
Find out how Rockwell Automation works with Flexicon Corporation to help them achieve a cost-effective, flexible and customizable solution for their machine development.
November 30, 2017
Find out how Rockwell Automation worked with Central States Industrial (CSI) to help them reduce development time and cost with Micro850? controllers.
November 8, 2017
In a recent clean water treatment project in Denmark, AB Electric A/S was tasked with developing and installing a comprehensive PlantPAx-based control and monitoring solution.
November 5, 2017
Modernizing a plant in Brazil provided faster maintenance agility, better control of operating costs and gains in flexibility.
November 1, 2017
Yalong’s gearbox assembly machine meets standard requirements for integrated safety, ultimately helping end users ease compliance and reduce costs.
October 1, 2017
Bharat Forge Aluminiumtechnik provides innovative aluminium forging solutions for the automotive industry.
September 30, 2017
Agency in Monterey, California, upgrades water treatment system to improve data collection and save millions with PlantPAx DCS.
September 27, 2017
Chobani deploys the latest control and automation technology to build a new fully automated yogurt manufacturing plant.
September 26, 2017
A state of the art crushing and processing plant incorporates the latest technologies in intelligent motor control.
September 25, 2017
Find out how this global company improved energy efficiency and reporting through a single energy monitoring solution.
September 14, 2017
The Columbia Machine FL6200SW combines high-speed stretch wrap technology with a contemporary, modular and clean-design palletizer.
September 7, 2017
At Midwest Farmers Cooperative’s new ag terminal, a distributed control system enables the co-op to move grain through quickly and reach new markets.
August 31, 2017
With a standardized system enabled by PlantPAx, the modern DCS, KCC was able to improve efficiency, reduce engineering time, reduce downtime and improve maintenance.
August 29, 2017
ConnectedProduction well-manager solution helps ARC Resources maintain production levels from aging, depleting wells.
August 29, 2017
Thanks to Rockwell Automation servo drives and AC drives, Neotecman has reduced the design, installation and setup time of its hydraulic stamping equipment.
August 22, 2017
The Axon SLX high-speed shrink sleeve applicator addresses the challenges of ultra-thin film. And it relies on the latest Rockwell Automation control platform.
August 22, 2017
A global manufacturer of specialty papers and fibre-based engineered materials, wanted a new machine to connect seamlessly with a plant’s existing infrastructure.
August 21, 2017
Offshore exploration and production company achieves 99 percent uptime and improves reliability with flexible, virtualized PlantPAx modern DCS.
August 21, 2017
Biopharmaceuticals producer upgrades skid control systems that are near the end of their service lives, and improves operations visibility and uptime in the process.
July 21, 2017
The E300 electronic overload relay helped to efficiently synchronize data between installed machines and devices.
July 20, 2017
Yalumba implements new state of the art bottling lines to help reduce labour costs, increase production capacity and minimise occupational health and safety issues.
July 17, 2017
The SR-400 robot autoloader automatically adjusts to a random flow of product. It features a single, unified Rockwell Automation control and visualization environment.
July 6, 2017
Kraft Heinz increases food-production capacity on production line by 10 percent and reduces quality variability with model predictive control software.
July 5, 2017
Liquid Pack worked with Rockwell Automation and NHP to design and manufacture a revolutionary new filling machine with uncompromised precision and accuracy.
June 30, 2017
The Sag-Correction System helped reduce sag-related downtime by 90 percent, annually saving $90,000 in lost production.
June 26, 2017
Oil and gas company Repsol uses SIS migration to meet new internal safety requirements while minimizing obsolescence risks and improving visibility in the process.
June 20, 2017
Bilfinger Greylogix creates standardised control environment at Gasunie across 15,500 km gas pipeline network.
June 19, 2017
Anglo American is one of the world's largest mining operations in the world with a capacity to produce 26.5 million tons of iron ore per year.
June 18, 2017
With variable pitch, higher speed and greater throughput forming the crux of a new assembly machine, Maga Active turned to Rockwell Automation with its innovative iTRAK? technology.
June 12, 2017
Systemwide integration technologies saves $2.3 million in maintenance and downtime.
June 9, 2017
KUKA evaluated the standard automation systems used in auto manufacturing facilities and saw an opportunity to create a system that would be flexible, efficient and cost effective.
June 7, 2017
Enabled by EtherNet/IP network, the ControlLogix system helps perform remote management and maintenance tasks.
June 6, 2017
A U.S. liquid petroleum distributor implemented a virtualized distributed control system from Rockwell Automation in a new facility and reduced training and troubleshooting.
June 5, 2017
Rockwell Automation Global Solutions leveraged their Integrated Architecture platform to deliver an industry leading tissue machine solution that future-proofs Asaleo Care’s production.
June 2, 2017
This attractive replacement for open waste containers can save up to 70% in waste handling costs – and features an Allen-Bradley Micro820 control system.
June 2, 2017
A Rockwell Automation data-analytics solution helps Rockline Industries boost OEE by more than 20 percent.
May 30, 2017
Optima Control Solutions solves obsolescence issues at leading UK biscuit manufacturer and delivers high quality S88-based batch control solution.
May 29, 2017
The school teamed up with Rockwell Automation to create a new talent pipeline to fill growing need for skilled manufacturing technicians.
May 26, 2017
Turkish maritime ship-board control provider leverages proven industrial hardware and software SCADA architecture to revolutionise ship’s systems development.
May 15, 2017
Maker of FluMist nasal vaccine implements modern DCS to access critical information from disparate systems.
May 12, 2017
A leading food manufacturer upgraded their condiment production line to an end of line solution that takes the bottles and makes them ready for supermarket shelves.
May 11, 2017
The Mosaic Company enhances decision-making capabilities and reduces alarms by 50 percent with modern DCS.
May 8, 2017
Automating the train load out process delivers improved capacity, profitability and safety at Anglo American’s German Creek mine.
May 1, 2017
To better manage energy consumption, the Dalian China metro system implemented a FactoryTalk software solution ultimately reducing energy use by 12%
April 27, 2017
Integrated production intelligence provides insight to real-time data, allowing operators to perform predictive maintenance procedures.
April 24, 2017
A leading chemical producer increased production efficiency and improved product quality and consistency.
April 17, 2017
To stay abreast of evolving technologies and customer demands, GrafTech utilized FactoryTalk VantagePoint software in its proprietary ArchiTech furnace productivity system.
April 10, 2017
Industrial lubricant manufacturer reduces cycle time and product variance while batch and ingredient-management reports ease troubleshooting.
April 8, 2017
Using PlantPAx, Prodesa cuts 1,000 hours of engineering time in the development and implementation of the world’s second biggest wood pellet plant.
April 3, 2017
The City of College Station reduced energy costs by $65,000 annually while increasing production from 8.1 million gallons per day to 11.8 million gallons.
March 22, 2017
Indian automaker standardizes enterprisewide communication and connects plant floor to enterprise, opening door to production and efficiency gains.
March 6, 2017
Energy Control Technologies abandoned proprietary technologies in favor of an open-systems approach for a new turbomachinery process control solution.
March 1, 2017
MGE Automation installs integrated packaging suite at a leading cereal bar producer, using a solution that lays groundwork for access to the connected Enterprise.
March 1, 2017
Southwest Baking expanded its process flexibility and production by 5 percent with a batch system upgrade.
February 21, 2017
After receiving multiple power interruptions that resulted in damaged equipment, Commerce Township installed a voltage monitoring system – resulting in reduced downtime and compliance risk.
February 15, 2017
Improving efficiency by 20% helps power generation company achieve ROI in two years.
February 10, 2017
Chobani’s commitment to the local Australian market to provide high-quality, fresh yogurt relies on maintaining a smoothly operating manufacturing plant.
February 10, 2017
Europhartech implements holistic serialization solution for its medicine packaging lines to address upcoming legislation.